Olight PL-MINI 3 Valkyrie Weapon Mountable LED Torch

The Olight PL-Mini 3 Valkyrie is a compact and durable light, with an output of up to 600 lumens, plus a strobe function. 

It is designed for handguns with a picantinny rail or a glock style rail and comes with two mount adaptors (1913, GL and Hellcat) to make it compatible with a wide range of handguns. There is also an adjustable sliding block with three positions to allow for flexible positioning on a variety of rails.

The PL-Mini 3 is attached to the weapon rail using the secure screw locking mechanism by loosening the screw on the side by hand, or with the included hex wrench. Once loose the screw pushes in to open up the bracket and allow the PL-Mini 3 to be positioned onto the rail. When in place the screw can be released to allow the bracket to close around the rail, and the screw can be tightened to keep the torch securely in place.

Two ambidextrous switches and are located on the back of the light and are pushed from the side to activate the light. A quick press and release of the either button will turn the light on in the last used output and another quick press will turn the light off. If you don't press and release the button quick enough it will trigger the momentary operation and the light will stay on until you release the button.

While the light is on low and high can be changed between with two quick presses of either button. Strobe can be activated or exited by pressing and holding both buttons at the same time.

To deactivate the strobe function, quickly press either of the buttons five times holding the last press for at least one second. Repeat to reactivate the strobe function.

Powered by a lithium polymer battery, the Pl-Mini 3 is easily recharged suing the included IMCC magnetic battery charger. Simply remove the battery and connect the charger to the bottom of the battery and charging with automatically begin. The indicator on the charger will show red while charging is in progress and turn green once charging is complete after approximately 50 minutes.

Light, versatile and compact, the PL-Mini 3 Valkyrie is the perfect companion for your handgun. 

Product Features

Ambidextrous switch for left or right hand operation
Adjustable sliding block with three positions
1912 and GL mount adaptors
Two brightness levels and strobe

Operational Modes

Turbo:
600 lumens; 1 minute run-time; 100 m beam-range
100 lumens; 65 minutes run-time

Strobe: 600 lumens; 13 Hz

Please Note: The above data is measured in lab conditions, therefore results may vary due to environmental and heat dissipation conditions. The active thermal management system will decrease the output in high mode to protect the LED from overheating.

Technical Details

Type: Weapon Light
Operating Modes: Turbo / Strobe
Luminous Flux: Up to 600 lumens
Lamp Type: Cool white LED
Beam Range: Up to 100 m
Batteries Required: Built-in 260 mAh lithium polymer battery
Dimensions: 52.5 mm x 27.6 mm x 33.8 mm
Weight: 68 grams
Body Colour: Black
Body Material: Aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Left and right buttons located on the back
Impact Resistance: 1 m
Environmental: IPX6
Warranty: 5 years (torch)

Packaging and Contents

Supplied in retail packaging and contains:
Olight PL-Mini 3 x 1
260 mAh lithium polymer battery x 1
Hellcat adaptor x 1
GL adaptor x 1
IMCC magnetic charging cable x 1
Battery box x 1
M3x4 socket screw x 2
H1.5 mm L-shaped allen wrench
HM2.5*4 screw x 2
Manual x 1