Olight Obulb Pro S Red Multicoloured Rechargeable LED Light Orb (With MCC1A Charger)

The Olight Obulb Pro S is an update on the Obulb Pro, offering an output of 240 lumens warm white light and 6 coloured light outputs and app control, now in red and including the MCC1A charger.

All this is packed into in a slightly larger yet still mini rechargeable orb that is compact enough to take on your travels in a holdall, hand bag or backpack, so you will always have a light source. The different modes makes this an all round versatile product, of which uses include camping, hiking, night work, emergency power outage, ambience lighting, night light, signalling and party decoration.

The Obulb an be operated manually with the button on the bottom (or the top can be pressed down when sat on a hard surface) or to access further features and controls it can be operated using the new Olight Hub App. Once turned on the button can be pressed to cycle through the different modes in the order of white, mode 1, mode 2, mode 3, mode 4, mode 5, mode 6 and off. In ant mode press and hold the button for step-less dimming.

With App control the white brightness level can be changed between 4.5 lumens (1%) and 240 lumens (100%), as well as dimming the other colours & modes using the brightness slider bar. The colour wheel setting within the Olight Hub App also allows you to custom select a colour, and shows the battery life remaining. Multiple Obulb Pro S's can be connected to the Olight Hub App to allow groups to be created to easily turn on/off the Obulb Pro S's in that group, and data sharing allows you to give others control of your Obulbs.

To prevent accidental activation, the Obulb Pro S has a lock out feature that can be accessed by holding down the button for over 2 seconds while the light is off. The lantern will flash before entering the lockout, and if the button is pressed once in lockout, the white will just flash to notify that lockout is engaged. Press and hold the button again for over 1 second to exit the lockout.

Featuring a magnetic base, the Obulb can be attached to a variety of magnetic surfaces, such as a car bonnet, fridge etc. If you don't have a magnetic surface, you can also use the included adhesive metal badge to mount your Obulb Pro S by simply removing the adhesive film and placing the sticky side onto a surface of your choice, and the Obulb Pro S can then magnetise to the metal surface of the badge.

The Obulb Pro S is powered by a built-in rechargeable lithium polymer battery with a capacity of 1650 mAh, and it uses Olight's signature Magnetic charging technology to recharge. Simply connect the included magnetic end of the MCC1A cable to the base of the Obulb Pro and plug the USB end into a suitable USB power source. The light on the cable will go red to show charging is in progress and turn green once charging is complete, after approximately 3 hours. Charge the Obulb Pro S before its first use to unlock the torch.

Tough as they come, the Obulb Pro S can withstand a drop height of up to 1.5 metres and is waterproof to IPX7 standard, which makes it ideal for the pool or bathtub as it will float on top of the water to provide ambient lighting.

Please Note: Brightness level adjustment is only available via the Olight Hub App controls, the manual control will only change mode and not the brightness level.

Operational Modes

White Light:
White High: 240 lumens; 2 hours, 30 minutes run-time
White Low: 0.8 lumens; 6 days, 12 hours run-time

Coloured Lights (factory default):
Mode 1: 10 lumens; 12 hours run-time
Mode 2: 10 lumens; 12 hours run-time
Mode 3: 15 lumens; 9 hours run-time
Mode 4: 9 lumens; 12 hours, 30 minutes run-time
Mode 5: 12 lumens; 7 hours, 30 minutes run-time
Mode 6: 41 lumens; 16 hours

Technical Details

Type: LED light orb
Operating Modes: White / Mode 1 / Mode 2 / Mode 3 / Mode 4 / Mode 5 / Mode 6
Luminous Flux: Up to 240 lumens
Lamp Type: Warm white LED / Multicoloured LEDs
Batteries Required: Built-in 1650 mAh lithium polymer battery
Height: 58 mm
Diameter: 65 mm
Weight: 105 grams
Body Colour: Red
Switch Type: Push button
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX7 standards
Warranty: 2 years

Packaging and Contents

Supplied in retail packaging and includes:
Olight Obulb Pro S LED light orb x 1
Adhesive metal badge x 1
MCC1A Charger x 1
Manual x 1