Fenix BC15R Rechargeable LED Bike Light

The Fenix BC15R is a compact and lightweight rechargeable bicycle light with an output of up to 400 lumens making it the perfect bike light for everyday cycling.    

Utilising a single Luminus SST20 LED it provides a choice of three white brightness levels as well as a flashing mode, and has a maximum beam range of up to 142 metres. The anti-glare lens design ensures a uniform and soft beam without dazzling oncoming pedestrians or traffic.

Turn the torch on by holding the button on top for 0.5 seconds and then each press cycles through the modes of low, mid and high. Hold the switch for 0.5 seconds again to turn the light off. Flash is activated with the light on by double pressing the button, and a single press will exit flash. The last used setting except flash will be remembered next time the light is turned on.

The high quality Fenix handlebar mount features adjustable rubber shims to fit a wide range of handlebars and offers a quick detach function. It also allows for 15° horizontal adjustment and will be vertically locked at any angle. With both thick and shims it will fit handlebars between 22-28 mm, with just the thin shim it fits 28-32 mm and with no shims is fits 32-35 mm.

Included is a built-in 18650 lithium-ion battery which charges inside the bike light via the USB-C charging port for faster charging. With the torch off, remove the dust cover from the USB-C port located on the front underside of the torch, and plug the included cable into the torch one end and the other end into a USB power source.

The LED charging indicator in the button will go red to indicate charging is in progress and will turn green once charging is complete after approximately 2 hours when charging the included battery. Once charging is complete remember to insert the dust cover properly and check the tail cap is tight to ensure the IP68 rating is maintained.

A built-in battery level indicator in the button displays the battery status for 3 seconds when the light is first turned on or when the button is pressed once while the light is off. It will show either a solid green, green flashing, solid red or red flashing light. A low battery voltage warning function is programmed to downshift to a lower brightness level when the voltage drops below the preset level. Once it reaches low output the indicator will constantly blink red to remind you to charge your battery.

Intelligent overheat protection will automatically downshift the brightness slightly if the internal temperature reaches 60°C or above in turbo mode, and once the torch has cooled it will allow the user to reselect the higher outputs.

A versatile light perfect for all your outdoor cycling adventures.

Product Features

Easy, one handed operation
Quick attach and detach handlebar mount
Detachable shims for different size handle bars
Low battery indicator and low voltage indicator
Overheat protection downshifts brightness
Included battery charged internal via USB-C port

Operational Modes

High: 400 lumens; 3 hours, 40 minutes; 78 m beam range
Medium: 150 lumens; 10 hours, 30 minutes run-time; 47 m beam range
Low: 50 lumens; 31 hours, 30 minutes beam range; 28 m beam range
Flash: 400/50 lumens

Note: *The flash mode 

Tested in laboratory conditions to ANSI/PLATO FL1 standard using the included lithium-ion rechargeable battery under the temperature of 21±3°C and humidity of 50% - 80%. Results may vary between torch, battery and environments.

Technical Details

Type: LED cycle torch
Operating Modes: High / Mid / Low / Flash
Luminous Flux: Up to 400 lumens
Lamp Type: Luminus SST20 LED
Beam Range: Up to 78 m
Batteries Required: built-in 18650 lithium-ion battery x 1
Lamp Measurements: 102 x 31.5 x 31 mm
Weight: 109 grams
Body Colour: Black
Body Material: Polycarbonate
Switch Type: Push button
Impact Resistance: 1 m
Environmental: IPX6
Warranty: 5 years (torch)

Packaging and Contents

Supplied in retail packaging and includes:
Fenix BC15R LED cycle torch x 1
USB-C charging cable x 1
Quick release bike mount x 1
Manual x 1