Armytek Handy C2 VE Dual Bay Lithium-ion Battery Charger

The Handy C2 VE is a lithium-ion battery charger with two charging bays which can also be used as a power bank.

The Handy C2 VE is suitable for charging either 18650 or 18700 type Li-ion batteries only.

Simply insert the batteries with the positive contact facing the top of the charger, the winged design keeps the batteries securely in place. Connect the included USB-C charging using the port on the bottom and the other end to a suitable USB power source. The charger will automatically stop charging once the batteries are fully charged.

The power indicator above the battery channel displays the level of charge when batteries are inserted, each LED will flash blue before turning solid blue. Four LED's indicate 75%, three indicate 50%, two indicate 25% and one LED indicates 3%. Once all four indicators are solid blue charging is complete after approximately 2 hours thanks to the 2A fast charge current.

To use the Handy C2 VE as a power bank simply insert the batteries and connect your devices charging cable using the USB-A port. Then connect your device and charging will begin automatically. The intelligent power bank memory system will use energy from both channel combined to increase the efficiency of charging. The power indicator will show the remaining level of charge in the batteries, if less than 3% the last indicator will flash and the batteries should be recharged as soon as possible.

Note: Always use in accordance with instruction manual and read before first use.

Product Features

Reverse polarity and short circuit protection
USB-C to supply power for the charger
Independent charging bays
Soft start charging

Operation Temperature: -10 to 40℃
Input: DC 5V / 4A
Output: 2 x 4.2V / 2A
Power bank: DC 5V / 2.5A
Constant Charge Current: 2A (per bay)
Cut-off Voltage: 4.2 V

Supplied in retail packaging and includes:
Armytek Handy C2 VE dual bay charger x 1
USB-C charging cable x 1
Manual x 1

Safety Notes

1. Charge only rechargeable 3.6/3.7 V lithium-ion batteries.
2. Charging any other types of batteries may cause them to leak rupture or explode.
3. Do not disassemble or modify any part of the charger or use as a power source.
4. Always unplug the charger from outlet before attempting maintenance or cleaning.
5. This charger should not be used by persons without adequate training or knowledge.